Pneumatic shut-off angle nutrunners

For an optimal torque / speed ratio, you have lever-start feature, with or without a torque signal, and two motor powers. The most difficult accesses are accessible thanks to the reduced sizes of the angle heads proposed in square male or hexagonal female outputs.

Our products for Pneumatic shut-off angle nutrunners

  • DSE RRI-SA30511W shut-off pneumatic screwdriver
    Code 4-1577802

    The DSE RRI-SA30511W pneumatic angle screwdriver is designed for medium capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision over wide adjustment ranges. It is pre-equipped with two sockets for processing pneumatic signals.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    3.5 Nm lbf.in
    Max Torque
    10 Nm lbf.in
    Nominal speed
    550 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.36 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G3/8
    Noise level
    72
    Air flow
    720
  • DSE RRI-SA30710W shut-off pneumatic screwdriver
    Code 4-1577801

    The DSE RRI-SA30710W pneumatic angle screwdriver is designed for medium capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision over wide adjustment ranges. It is pre-equipped with two sockets for processing pneumatic signals.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    3.5 Nm lbf.in
    Max Torque
    8.2 Nm lbf.in
    Nominal speed
    700 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.36 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G3/8
    Noise level
    72
    Air flow
    720
  • DSE RRI-SA31108W shut-off pneumatic screwdriver
    Code 4-1577800

    The DSE RRI-SA31108W pneumatic angle screwdriver is designed for medium capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision over wide adjustment ranges. It is pre-equipped with two sockets for processing pneumatic signals.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    3.5 Nm lbf.in
    Max Torque
    6.3 Nm lbf.in
    Nominal speed
    1100 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.36 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G3/8
    Noise level
    72
    Air flow
    720
  • DSEI RA260L350 shut-off pneumatic screwdriver
    Code 4-1500044

    The DSEI-RA260L350 pneumatic angle screwdriver is designed for medium and strong capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    10.5 Nm lbf.in
    Max Torque
    26 Nm lbf.in
    Nominal speed
    350 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.45 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    77
    Air flow
    600
  • DSEL RA30L1400 2CS shut-off pneumatic screwdriver
    Code 4-1501726

    The DSEL-RA30L1400 2CS pneumatic angle screwdriver is designed for small capacity tightening in hard-to-reach or multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision and with two air intakes referred to as 2CS.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    3 Nm lbf.in
    Nominal speed
    1400 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Functionalities
    Torque reach signal
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA30L1400 BITS shut-off pneumatic screwdriver
    Code 4-1500901

    The DSEL-RA30L1400 BITS pneumatic angle screwdriver has a female hexagonal output for small capacity tightening in hard-to-reach and multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    3 Nm lbf.in
    Nominal speed
    1400 tr/min rpm
    Drive Size
    1/4" F/Hex
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA30L1400 shut-off pneumatic screwdriver
    Code 4-1544440

    The DSEL-RA30L1400 pneumatic angle screwdriver is designed for small-capacity tightening in multi-plane or hard-to-reach environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    3 Nm lbf.in
    Nominal speed
    1400 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA40L950 2CS shut-off pneumatic screwdriver
    Code 4-1501727

    The DSEL-RA40L950 2CS pneumatic angle screwdriver is designed for small capacity tightening in hard-to-reach or multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision and with two air intakes referred to as 2CS.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    4 Nm lbf.in
    Nominal speed
    950 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Functionalities
    Torque reach signal
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA40L950 BITS shut-off pneumatic screwdriver
    Code 4-1500902

    The DSEL-RA40L950 BITS pneumatic angle screwdriver has a female hexagonal output for small capacity tightening in hard-to-reach and multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    4 Nm lbf.in
    Nominal speed
    950 tr/min rpm
    Drive Size
    1/4" F/Hex
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA40L950 shut-off pneumatic screwdriver
    Code 4-1544441

    The DSEL-RA40L950 pneumatic angle screwdriver is designed for small-capacity tightening in multi-plane or hard-to-reach environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    4 Nm lbf.in
    Nominal speed
    950 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460