Pneumatic shut-off angle nutrunners

For an optimal torque / speed ratio, you have lever-start feature, with or without a torque signal, and two motor powers. The most difficult accesses are accessible thanks to the reduced sizes of the angle heads proposed in square male or hexagonal female outputs.

Produits

  • DSE RRI-SA30511W shut-off pneumatic screwdriver
    Code 4-1577802

    The DSE RRI-SA30511W pneumatic angle screwdriver is designed for medium capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision over wide adjustment ranges. It is pre-equipped with two sockets for processing pneumatic signals.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    3.5 Nm lbf.in
    Max Torque
    10 Nm lbf.in
    Nominal speed
    550 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.36 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G3/8
    Noise level
    72
    Air flow
    720
  • DSE RRI-SA30710W shut-off pneumatic screwdriver
    Code 4-1577801

    The DSE RRI-SA30710W pneumatic angle screwdriver is designed for medium capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision over wide adjustment ranges. It is pre-equipped with two sockets for processing pneumatic signals.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    3.5 Nm lbf.in
    Max Torque
    8.2 Nm lbf.in
    Nominal speed
    700 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.36 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G3/8
    Noise level
    72
    Air flow
    720
  • DSE RRI-SA31108W shut-off pneumatic screwdriver
    Code 4-1577800

    The DSE RRI-SA31108W pneumatic angle screwdriver is designed for medium capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision over wide adjustment ranges. It is pre-equipped with two sockets for processing pneumatic signals.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    3.5 Nm lbf.in
    Max Torque
    6.3 Nm lbf.in
    Nominal speed
    1100 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.36 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G3/8
    Noise level
    72
    Air flow
    720
  • DSEI RA260L350 shut-off pneumatic screwdriver
    Code 4-1500044

    The DSEI-RA260L350 pneumatic angle screwdriver is designed for medium and strong capacity tightening whether hard-to-reach or multi-plane. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    10.5 Nm lbf.in
    Max Torque
    26 Nm lbf.in
    Nominal speed
    350 tr/min rpm
    Drive Size
    3/8 Square
    Weight
    1.45 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    77
    Air flow
    600
  • DSEL RA30L1400 2CS shut-off pneumatic screwdriver
    Code 4-1501726

    The DSEL-RA30L1400 2CS pneumatic angle screwdriver is designed for small capacity tightening in hard-to-reach or multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision and with two air intakes referred to as 2CS.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    3 Nm lbf.in
    Nominal speed
    1400 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Functionalities
    Torque reach signal
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA30L1400 BITS shut-off pneumatic screwdriver
    Code 4-1500901

    The DSEL-RA30L1400 BITS pneumatic angle screwdriver has a female hexagonal output for small capacity tightening in hard-to-reach and multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    3 Nm lbf.in
    Nominal speed
    1400 tr/min rpm
    Drive Size
    1/4" F/Hex
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA30L1400 shut-off pneumatic screwdriver
    Code 4-1544440

    The DSEL-RA30L1400 pneumatic angle screwdriver is designed for small-capacity tightening in multi-plane or hard-to-reach environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    3 Nm lbf.in
    Nominal speed
    1400 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA40L950 2CS shut-off pneumatic screwdriver
    Code 4-1501727

    The DSEL-RA40L950 2CS pneumatic angle screwdriver is designed for small capacity tightening in hard-to-reach or multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision and with two air intakes referred to as 2CS.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    4 Nm lbf.in
    Nominal speed
    950 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Functionalities
    Torque reach signal
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA40L950 BITS shut-off pneumatic screwdriver
    Code 4-1500902

    The DSEL-RA40L950 BITS pneumatic angle screwdriver has a female hexagonal output for small capacity tightening in hard-to-reach and multi-plane environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    4 Nm lbf.in
    Nominal speed
    950 tr/min rpm
    Drive Size
    1/4" F/Hex
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460
  • DSEL RA40L950 shut-off pneumatic screwdriver
    Code 4-1544441

    The DSEL-RA40L950 pneumatic angle screwdriver is designed for small-capacity tightening in multi-plane or hard-to-reach environments. The startup is activated by a lever. It is equipped with an air-cutoff clutch which guarantees tightening precision.

    Type of screwdriver
    Shut-off pneumatic screwdriver
    Min Torque
    0.8 Nm lbf.in
    Max Torque
    4 Nm lbf.in
    Nominal speed
    950 tr/min rpm
    Drive Size
    1/4 Square
    Weight
    0.7 kg lbs
    Shape
    Angle head
    Starting system
    Lever
    Power
    Pneumatic
    Air inlet
    G1/4
    Noise level
    73
    Air flow
    460