DMF…LAPC - Posi control carbon fiber telescoping arms

Equipped with an angular position encoder and a linear encoder, DMF ... LAPC arms follow tightening sequences and ensure quality assembly. Carbon fiber engineered, DMF telescopic arms have an unequaled weight / robustness / compactness ratio. Easy to install and suspend on existing assembly line rails, they do not disrupt the workflow. Equipped with various gripping tools, they are extremely versatile in performing frontal, lateral, vertical tightening without any effort thanks to the fluidity of their telescopic geometry.

Produits

  • DMF 140 LAPC/1500 posi control carbon telescoping arm
    Code 4-5200660

    In addition to the unparalleled benefits of the design of DMF carbon fiber torque reaction telescopic arms, DMF 140 LAPC/1500 is equipped with two position encoders: one an angle the second a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right torque and in the right place. No defects.

    Max torque
    140 Nm lbf.in
    Max load
    6 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    1500 mm inch
    Mini tool diameter
    35 mm inch
    Maxi tool diameter
    52 mm inch
    Standard tool holder
    P2/P3
  • DMF 140 LAPC/1500 posi control carbon telescoping arm - without clamp
    Code 4-5200667

    In addition to the unparalleled benefits of the design of DMF carbon fiber telescopic arms, DMF 140 LAPC/1500 is equipped with two position encoders: one an angle the second  a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right couple and in the right place.

    Max torque
    140 Nm lbf.in
    Max load
    6 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    1500 mm inch
    Standard tool holder
    Optional
  • DMF 140 LAPC/2000 posi control carbon telescoping arm
    Code 4-5200661

    In addition to the unparalleled benefits of the design of DMF carbon fiber torque reaction telescopic arms, DMF 140 LAPC/2000 is equipped with two position encoders: one an angle the second a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right torque and in the right place. No defects.

    Max torque
    140 Nm lbf.in
    Max load
    6 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    2000 mm inch
    Mini tool diameter
    35 mm inch
    Maxi tool diameter
    52 mm inch
    Standard tool holder
    P2/P3
  • DMF 140 LAPC/2000 posi control carbon telescoping arm - without clamp
    Code 4-5200668

    In addition to the unparalleled benefits of the design of DMF carbon fiber telescopic arms, DMF 140 LAPC/2000 is equipped with two position encoders: one an angle the second  a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right couple and in the right place.

    Max torque
    140 Nm lbf.in
    Max load
    6 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    2000 mm inch
    Standard tool holder
    Optional
  • DMF 30 LAPC/1500 posi control carbon telescoping arm
    Code 4-5200596

    n addition to the unparalleled benefits of the design of DMF carbon fiber torque telescopic arms, DMF 30 LAPC/1500  is equipped with 2 position encoders: one an angle the second a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right torque and in the right place. No defects.

    Max torque
    30 Nm lbf.in
    Max load
    4 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    1500 mm inch
    Mini tool diameter
    28 mm inch
    Maxi tool diameter
    52 mm inch
    Standard tool holder
    P1
  • DMF 30 LAPC/1500 posi control carbon telescoping arm - without clamp
    Code 4-5200663

    In addition to the unparalleled benefits of the design of DMF  carbon fiber telescopic arms, DMF 30 LAPC/1500 is equipped with two position encoders: one an angle the second  a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right couple and in the right place.

    Max torque
    30 Nm lbf.in
    Max load
    4 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    1500 mm inch
    Standard tool holder
    Optional
  • DMF 30 LAPC/2000 posi control carbon telescoping arm
    Code 4-5200597

    In addition to the unparalleled benefits of the design of DMF carbon fiber torque telescopic arms, DMF 30 LAPC/2000  is equipped with 2 position encoders: one an angle the second a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right torque and in the right place. No defects.

    Max torque
    30 Nm lbf.in
    Max load
    4 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    2000 mm inch
    Mini tool diameter
    28 mm inch
    Maxi tool diameter
    52 mm inch
    Standard tool holder
    P1
  • DMF 30 LAPC/2000 posi control carbon telescoping arm - without clamp
    Code 4-5200664

    In addition to the unparalleled benefits of the design of DMF  carbon fiber telescopic arms, DMF 30 LAPC/2000 is equipped with two position encoders: one an angle the second  a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right couple and in the right place.

    Max torque
    30 Nm lbf.in
    Max load
    4 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    2000 mm inch
    Standard tool holder
    Optional
  • DMF 30 LAPC/960 posi control carbon telescoping arm
    Code 4-5200595

    In addition to the unparalleled benefits of the design of DMF carbon fiber torque telescopic arms, DMF 30 LAPC/960  is equipped with 2 position encoders: one an angle the second a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right torque and in the right place. No defects.

    Max torque
    30 Nm lbf.in
    Max load
    4 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    960 mm inch
    Mini tool diameter
    28 mm inch
    Maxi tool diameter
    52 mm inch
    Standard tool holder
    P1
  • DMF 30 LAPC/960 posi control carbon telescoping arm - without clamp
    Code 4-5200662

    In addition to the unparalleled benefits of the design of DMF  carbon fiber telescopic arms, DMF 30 LAPC/960 is equipped with two position encoders: one an angle the second  a cable encoder. Your operators therefore necessarily respect the programmed tightening sequences. Each screw is tightened to the right couple and in the right place.

    Max torque
    30 Nm lbf.in
    Max load
    4 kg lbs
    Installation
    Bench mount, 
    Suspended
    Functionalities
    Tool positioning system
    Stroke/Working radius
    960 mm inch
    Standard tool holder
    Optional