Product description

The DMM automatic screw feeders include a hollow balance valve that selects and orients the screws before transferring them to a gravity rail to the separator.
From there, a screw is blown through the pipe to the screwdriver’s nose at each request sent by the screwdriver. At the same time, a new screw is separated and routed into the blow tube.
The screw is held at the end of the screwdriver after the dispensing nose has retracted.
This solution combines the advantage of a conventional screw supply by avoiding the need for the operator to place the screw on the end piece at each screw, as well as access to the screwdriving points in terms of optimal footprint, compared to a traditional device.
It is also characterized by extreme robustness and absolute comfort of use, silent and without vibration.

The DMM automatic screw feed is ideal for assembling parts where access to screwdriving points is difficult.

The head diameter/overall length ratio should ideally be 1.5.
The DMM automatic screw feed accepts different size screws, however it is necessary to validate the compatibility for each application. Only magnetisable screws are compatible.