Assembly technology

DMM – automatic screw feeding system magnetic

DMM – automatic screw feeding system magnetic

The DMM portable magnetic holding tool is intended for applications where accessibility to screwdriving points is reduced.
The screw being held at the end of the bit after is fed into the nose and the retraction of it, it is possible to reach screwdriving points where the use of a guide tube is not possible due to the place around the screw head.

Benefits

Productivity
  • Saves cycle time
Easy to use
  • No adjustment required
Quality
  • Robust design
  • Quiet operation without any vibration
  • Prevents nose contact with the workpiece

Product description

Operating mode:

The DMM automatic screw feeders include a hollow balance valve that selects and orients the screws before transferring them to a gravity rail to the separator.
From there, a screw is blown through the pipe to the screwdriver’s nose at each request sent by the screwdriver. At the same time, a new screw is separated and routed into the blow tube.
The screw is held at the end of the screwdriver after the dispensing nose has retracted.
This solution combines the advantage of a conventional screw supply by avoiding the need for the operator to place the screw on the end piece at each screw, as well as access to the screwdriving points in terms of optimal footprint, compared to a traditional device.
It is also characterized by extreme robustness and absolute comfort of use, silent and without vibration.

 

Product advantage:

The DMM automatic screw feeder is ideal for assembling parts where access to screwdriving points is difficult.

 

Compatibility of the screws:

The head diameter/overall length ratio should ideally be 1.5.
The DMM automatic screw feeder accepts different size screws, however it is necessary to validate the compatibility for each application. Only magnetisable screws are compatible.

Videos

Associated services

Our  after-sales service department provides installation and assistance to commissioning on your site.

Resources

1Commercial documentation

60315

Automatic screwfeeding systems - DMS / DMA / BSF 300 / DMM / DA-100 series - DOC.60315

- Telescopic automatic screwfeeding system - DMS serie
- Auto advanced automatic screwfeeding system - DMA serie and BSF 300 serie
- Automatic screwfeeding system magnetic - DMM serie
- Automatic screwfeeding system for automation - DA-100 serie and BSF 300 A serie
- Applications

Download the file in pdf

2Technical documentation

Couverture User manual - Automatic screw feeding system with  magnetic retention - DMM-30

User manual - Automatic screw feeding system with magnetic retention - DMM-30 - DOC.60333

- Informations
- Safety
- Installation
- Using mode
- Settings
- Maintenance
- Part list
- Standards

Download the file in pdf