Torque tester
Torque tester
DOGA EZ V4 torque testers incorporate a static torque sensor to control the torque of shut-off screwdrivers, hydro-voltage screwdrivers of all types as well as torque wrenches.
Benefits
- DOGA EZ V4 torque testers incorporate an internal static torque sensor to control shut-off screwdrivers, torque wrenches
- Static or dynamic external brush sensors can be connected to EZ torque testers to cover all the tools including pulsed ones (hydro mode)
- EZ torque testers are equipped with statistical functions including Cm and Cmk indicators according to the AFNOR standard
- The EZ torque tester can be placed on a horizontal worktop or fixed on a vertical plane by the side notches
- The chassis and the facade of the testers are made of steel and they are equipped with anti-skid pads
Product description
EZ V4 torque testers cover a torque range of 0.2 to 20 Nm.
The range consists of 3 types of torque tester:
The EZ2 V4 Torque Tester
It covers a static torque range of 0.2 to 2 Nm (+/- 2% of the measuring range)
The EZ10 V4 Torque Tester
It covers a static torque range of 1 to 10 Nm (+/- 1% of the measuring range)
The EZ20 V4 Torque Tester
It covers a static torque range of 2 to 20 Nm (+/- 1% of the measuring range)
• Mains operation (power cord included) and battery
• Battery life of 12 hours
• Memorization of 500 torque measurements timestamped
• Ability to indicate statistics on a selected sample of values
• Several modes of measurement are selectable according to the material to be tested: tightening (clockwise and counter-clockwise), initial peak, hydro (tightening and untightening)
• An external sensor input is used to connect static or dynamic brush sensors, which will control an enlarged torque range (low or high capacity sensors)
• Connect to the PC with a supplied USB cable that will allow you to recharge the EZ V4 tester and transfer the results via HyperTerminal.
• Supplied in a carrying case containing USB link cable, power supply transformer, power outlets and calibration certificate
Associated products
Capteurs de couple statiques
Les capteurs de couple statiques vous permettent de tester tous les outils à entraînement continu, les visseuses hydrotention et les couples manuels (clés dynamométriques) que ce soit dans un ateli
Capteurs de couple dynamiques
Les capteurs de couple rotatifs dynamiques CheckStar Multi et IS Checkstar vous permettent de contrôler la qualité, la précision et la répétabilité de vos serrages dynamiques directement sur
Simulateurs pour capteur de couple
Utilisables avec des capteurs de couple statiques ou dynamiques, les simulateurs permettent de reproduire les conditions d’assemblage des matériaux hors ligne de production.
Resources
1Commercial documentation
Torque measuring instruments – DOC.60062
Torque testers
Torque read-outs
Torque transducers
Torque tester EZ smart series - Doc.60340
Equipped with a built-in transducer the EZ smart series is ideal to control and set the torque delivered by tightening tools (Air and electric screwdrivers, Torque Wrenches, Impulse tools...).
Download the file in pdf2Technical documentation
User manual Torque testers - EZ2 / EZ10 / EZ20 - DOC.60125
- Tester description
- Measuring mode selection - application
- Quick start guide
- Menus
- Downloading data